How to Replace Old Electrical Sockets?
Electrical sockets can sometimes be tough to fix. But there are a lot of ways that you can replace it on your own. Before you start replacing your electrical sockets, it is important for you to know how the socket is placed in your wall and what caused it to malfunction.
There are two ways that you can install a socket, these can either be flush mounted or surfaced. For any socket installment it is always better to fix your electrical fittings by surface mounting it, but if you want a better looking socket, you can always opt to go for flush mounting, because these look better and are less prone to all kinds of damage.
Make sure that before you add any kind of upgrade to your wall sockets, that it is compliant with IEE electrical regulations. Aside from that, you must also ensure that you find out if the circuit requires an RCD protection. This is important because, it will guarantee and secure that the problem does not happen again in the future.
If you are already thinking about fixing an old electrical socket in your home by yourself but you do not know how, here are some simple steps on how to achieve this yourself without getting professional help.
How to Upgrade a Socket
If you find that some of the electrical sockets in your home are scorched, or no longer working, then this can be a product of too much electronics plugged in one place at a time, or it can also be a product of loose connections.
Always remember that in order for you to avoid these problems from happening again, that you avoid plugging your appliances in extension cords so that the problem does not happen again. Always make sure to turn off or take out those you do not need so as not to overload the main socket.
As mentioned above, here are some simple steps on how to change your electrical socket yourself:
in order to fix your socket, start by isolating the main circuit. You can use a tester on the socket that you want to replace, so that you can find out and double check if the socket is really dead.
Gently unscrew he faceplate off the socket and pull it away from the wall. Before you throw anything away, make sure that you keep all the original screws, in case none of the new ones work or don’t fit the new one.
The second step that you need to do is to check the terminal and loosen the screws, then free the core cables. Always check if the insulati
on is heat damaged, if it is strip the ends of the cores and cut back.
If the earth core is exposed, you can run green or yellow sleeving over it. Since these metal boxes must be earthed, you can run a short length of earth cable between the terminals of the faceplate and the back box.
Lastly, the live core must be connected to the live terminal of the faceplate. Place the neutral wire in the neutral terminal and the earth terminal with the earth wire.
Make sure to tighten the screws, and ensure that the faceplate fits properly. If you have new screws and it doesn’t fit the new faceplate, you can always make use of the old screws.
To make sure that everything works according to how you installed it, use a socket tester to check if you connected the wires correctly.
Before you install or replace new sockets in your home, you must always make sure of the safety precautions to ensure that you do not hurt yourself while you are replacing your sockets.
All sockets must be installed according to your local building regulations. If you are not sure how to check if what you are trying to install follows the regulations, you can always seek for professional help, this will ensure that you do not get yourself hurt while installing anything electrical in your home.
Before you install anything in your home that has to do with electricity, always make sure of these safety precautions:
Switch Off the Main Power
Before installing a new socket or replacing it with a new one, always make sure that you turn off all the main power in your home to ensure that you do not get electrocuted.
Even if these things no longer work, there is still a possibility of you getting hurt during installation.
All homes have their own circuit breakers at home, always make sure to turn it off even if it means turning off all the power in your home.
It is better to do this in the middle of the day so that if you turn of your power, you can see what you are doing.
Leave a Note
Make sure to leave a note to let other people know that you are working on it – before you do any kind of work, make sure that you leave a note saying that you are working on the sockets around your house so that no one touches the breakers but you.
If you fail to attach a note to the breaker, you can risk your safety.
Use a Socket Tester
Before you take apart any kind of socket around your home, make sure to test the socket with a socket tester to ensure that there is no electrical power running through it.
Replacing an old socket can be very dangerous so if you want to do this yourself, you have to make sure that you follow the steps correctly. Of course if you do not want to do this yourself, you can always hire a professional to do this for you.