Bosch 1006 VSR 3/8-Inch Keyless Chuck Drill Review
For those who have done drilling operations, how was the experience? Most people whom I have come across with told me that they did not like the experience. Most of the negative comments com from those who used hand drills. I wonder why even those who use the current electric drills still give negative comments.
The comments provide a varied from one person to another, but they mostly complained about the weight of the drill, low rpm, and accidental actuation. Some of the guys tell me that they are uncomfortable. I agreed with them since I have also experienced the problems they said.
Recently, the problems that I used to face are long gone because I came to get a drill that in short is the best. The drill is the Bosch 1006VSR 3/8-Inch Keyless Chuck Drill. The drill has` high power, very light and no accidental activation. In short it has powerful performance.
2,600 RPM Motor
There are key factors you need to look at as a customer when you want to buy a drilling machine. One of the fundamental considerations is power. The drilling machine should have the capability to drill different surfaces quickly and faster.
One of the reasons why I say that the Bosch 1006VSR 3/8-Inch Keyless Chuck Drill is the best because it has around a 6.3 amp variable- speed motor that delivers up to 2600 rpm. The rpm gives it the high power for impressive drilling performance.
Over-Sized Two Finger Trigger
One may think that the purpose of the design to have over-sized two finger trigger is accommodate those who have big sized fingers. No, that is not true. The over-sized two finger trigger of the Bosch 1006VSR 3/8-Inch Keyless Chuck Drill is one of the important unique features has.
Before I had an experience with the drill, changing the speed of the drill while drilling was truly hectic. I believe those who have done drilling before can testify that. The over-sized two finger trigger of the Bosch 1006VSR 3/8-Inch Keyless Chuck Drill increases comfort when frequently changing the drilling speed.
Lock-On Switch Design
As you working with machines is in itself dangerous. It can be more dangerous when the design of the device itself exposes you to more danger. Safety during any machine work is paramount. Therefore, a good machine should be safe when using.
I once saw a colleague of mine almost dead just because there was accidental activation of one of the machines. The Bosch 1006VSR 3/8-Inch Keyless Chuck Drill takes your safety into consideration, and that is why is has the lock on switch. The improved lock-on switch design of the drill is recessed to help prevent accidental actuation.
Sturdy Belt Clip
Drilling for a long time can be tiresome. For those who have gone through, such experience will agree with me that at this a point you wish you could get a robot to a machine so that you just command it to continue doing drilling operations.
The reason is that of tiredness. There are also times during drilling that you want to do other operations but you cannot since the design of the drill does not accommodate that. For these challenges that the Bosch 1006VSR 3/8-Inch Keyless Chuck Drill come in handy. The drill has a durable, sturdy belt clip which makes toting the handy drill smooth and hand free.
Jacobs Ratcheting 3/8 Inch Keyless Chuck
From experience and research on drills I have come to find that buying a drilling equipment with so many parts is not wise, since that will make the workshop crowded, thereby increasing chances of accidents.
The Bosch 1006 VSR 3/8-Inch Keyless Chuck Drill has further improved the safety of workplace by having Jacobs ratcheting 3/8 inch keyless chuck design that offers the convenience of quicker and comfortable chucking and chucking. The feature holds accessories exceptionally well with minimal slipping.
- It provides high power
- It is comfortable to use
- It has the best weight to power ratio
- It has good speed control
- It has high torque
- It is expensive
- It is uncomfortable when held above the handle
Frequently Asked Questions
Q: Can the drill be used with 220v?
A: No, it is used only with 110V
Q: Does the drill have a trigger lock?
A: Yes it has, in the grip under the trigger
Q: Can this drill use a 19mm steel brad point bit high speed?
A: Yes it can use as long as the shank fits the drive
In conclusion, there are some fundamental features that a customer should check before buying a drilling machine. The features include power, comfortability, weight, and safety.
The Bosch 1006VSR 3/8-Inch Keyless Chuck Drill is the most optimal one since it strikes a balance between the above features.
The drill has high power, very comfortable and makes sure that the person operating the drill is much safe. That is because it has a lock on the switch and keyless chuck.
Trust me, from my experience; I have come to enjoy using it. Also from previous reviews of over 50 customers who have used the drill, 70% gave it five stat, which shows how effective it is.